1.0mm Pitch, 2.5mm Pull-Out Type Horizontal FPC Connector (Pull-Out Locking Type, Bottom Contact)

Product Overview

This ultra-thin, high-density FPC connector is a solid little piece of hardware built specifically for keeping connections tight inside cramped electronic housings. By running a tight 0.5mm pin spacing paired with a tiny 2.0mm vertical profile, it trims down your board footprint significantly. We went with a straightforward pull-out slider lock and a bottom-facing pin structure, meaning you get a highly reliable, space-saving connection layout that works beautifully for portable and small-scale electronic projects.

Product Features

• Convenient and Reliable Pull-Out Locking Mechanism

The side-pull sliding latch makes sliding the flexible ribbon cable in, locking it down, or popping it back out completely painless. The mechanics move smoothly and give you a steady clamping force, ensuring the FPC cable won't wiggle loose or pop out if the device takes a physical hit or gets rattled around during daily operation.

• Stable Bottom Contact Connection

With the terminal pins sitting at the very bottom of the plastic slot, the connector makes a solid physical link with the FPC pads from underneath the moment you snap the cable into place. This structural layout keeps your contact impedance steady and protects your signal integrity from dropping out when things heat up.

• Excellent Craftsmanship and Compatibility

We mapped out the outer casing to make sure it plays nice with automated pick-and-place SMT assembly lines, helping your factory floor run through production cycles quickly. The pin coplanarity stays highly uniform across the batch to guarantee a clean solder joint during reflow, and the overall specs index perfectly with standard FPC cables on the market.

Key Materials

• Housing: Molded from high-performance Liquid Crystal Polymer (LCP), which gives the piece great fluid properties during molding, handles reflow soldering temperatures easily, and won't warp out of shape over time.
• Terminals: Stamped out of high-elasticity copper alloy that packs solid conductivity, finished with selective gold or tin plating so the contacts resist wear and corrosion down the line while keeping impedance low.
• Actuator: Carved out of tough engineering plastic that matches the base frame material, ensuring the lock mechanism doesn't snap or get sticky after a few hundred cycles.

Application Areas

1. Consumer Electronics:A total staple for linking up displays, touchscreen overlays, camera units, fingerprint modules, and the main motherboards inside smartphones, tablets, thin laptops, digital cameras, and handheld gaming systems.
2. Smart Wearables and IoT Devices:Perfect for running module-to-board connections inside space-starved gadgets like smartwatches, wireless earbuds, AR/VR headsets, and small fitness tracking bands.
3. Display and Touch Modules:Acts as a standard interface link between various small-to-medium LCD or OLED screens, touch digitizer panels, and their underlying driver circuit boards.
4. Precision Electronic Devices:Handles high-density signal routing inside hobbyist drones, micro-projectors, and high-end portable medical monitoring hardware where you can't afford a heavy harness.

Material and Finish ：

Housing:LCP UL .94V-0 & Terminal:phosphor bronze & Fitting:Brass; Finish:Tin-plated & Gold-plated

CKT	Part No	DIM A	DIM B
4	LW10252-04	3	5.03
5	LW10252-05	4	6.03
6	LW10252-06	5	7.03
7	LW10252-07	6	8.03
8	LW10252-08	7	9.03
9	LW10252-09	8	10.03
10	LW10252-10	9	11.03
11	LW10252-11	10	12.03
12	LW10252-12	11	13.03
13	LW10252-13	12	14.03
14	LW10252-14	13	15.03
-	-	-	-
40	LW10252-40	39	41.03